Parts

ABI Headset Bearing for new builds or replacements.

Cannondale Headshok/Lefty Bearing

CNC machined 6061 aluminum Black anodized finish Attaches to frame with M8x18mm Socket Head Bolt Kona: CC-142 This hanger has M12x1.75 axle threads Kona Big Honzo ST - 2019-2020 Big Unit - 2014-2016 Explosif - 2013-2018 Honzo - 2013-2015 Honzo DL - 2021-2022 Honzo ESD - 2021 Honzo ST - 2016-2022 Honzo Ti - 2016-2018 Private Jake - 2016-2017 Raijin - 2014 Remote - 2018-2022 Shonky - 2016-2022 Shonky ST - 2021 Unit - 2020-2022 Unit X - 2020-2022 Woo - 2020-2022 Wozo - 2017-2020

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

RaceFace Crank Arm Fixing Bolts - M15

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

- Aheadset preload adjusting bolt

Service parts for Fox suspension.

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

1/2" X 1/8" -Pin Length: 9.2 mm

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

Saddle clamp heads and lowers for KS Dropper posts.

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Replacement cable anchor bolt for brakes - Includes nut and washer

• Designed to keep dust and dirt out of V-Brake cable/housing systems

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

FSA Mega Exo Small Parts.

Race Face Crank Arm Fixing Bolts - For EXI Cranks - Bolt Puller Cap Washer for self-extracting bolt

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

- For MTB levers - 7mm x 1mm - Aluminum construction

- Crown Race - Size: 27.0mm

- Type: Lock washer - Size: 1" Keyed

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

- Model: Replacement bolt - Compatibility: Allen, M5x16

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

KS Dropper Post Service Parts

- Crown Race MX - Size: MX TH 26.4mm

- Rubber - Color: Black

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

Lizard Skins grip donuts feature a neoprene material printed with the Lizard Skins logo and add comfort to the flange side of the grip.

Magura olives (compression ferrule) bag/20 - Small parts used to install hydraulic hose for Magura disc brakes. - Compatible with Campagnolo H11 brake/shift levers

- Sunlite Cottered Pins

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

- Routes cables underneath the bottom bracket - Will not rust or corrode

- w/Nut - 1-3/4-inch

- 8x1mm Allen head

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.

Cable exit guide specific to Slash+ for routing hydraulic brake & rear derailleur. Get your cables under control. Product details First used on Slash+ Leave removable tab in place for AXS shifting Hardware not included Refer to the Service Manual for assembly & service instructions For OE replacement purposes only - not intended for aftermarket installation

Securely attaches Slash+ speed sensor to the chainstay. Trek proprietary cable management system. Product details Designed for Slash+ Fasten with M4x0.7x6mm button head screw 6.3mm inner diameter clamping area Refer to the Service Manual for assembly & service instructions For OE replacement purposes only - not intended for aftermarket installation

Keep your elbow pads in place. - Necessary for proper assembly - M4 x 10mm

Parts for repair and maintenance of DT Swiss hubs.

FSA Mega Exo Small Parts.

BB30 Spacer - 15.46mm

- Replacement link wire for cantilever brakes

Standard replacement star nuts for threadless steerers.

KS Dropper Post Service Parts

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spring - Ratchet EXP

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Star Ratchet Spring

Flat head screws from Wheels Manufacturing.

Basics brake cables provide value on a budget. - Pre-stretched - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Color: Silver - Diameter: 1.6mm

- Aluminum w/lock nut - 18mm long/6mm O.D.

- Aluminum w/lock nut and mount - Slotted mount design

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

Complete remotes and remote components for KS dropper posts.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Hope Brake Lever Parts