Filter By:
Seatposts

$159.99
Trek-compatible seat mast cap
Offered in white and black and a variety of lengths and offsets, the mast cap includes hardware compatible with round saddle rails only. 7x10mm carbon rail-compatible hardware sold separately.
Key features:
- Ultra-light carbon construction
- One bolt head design offers easy fore-aft and infinite angle adjustment
- Compatible with all Trek road bikes with round seat masts
- 175mm and 135mm lengths
- 5mm and 20mm offsets
- Aluminum clamp

$18.99 - $24.99
Kalloy's 602 seatpost comes in a wide variety of diameters to fit most frames. Simple, sturdy, and lightweight, the 602 makes a great replacement seatpost.

$36.99
Dimension Suspension Seatpost
- Clamp Style: Std Rails
- Diameter: 27.2mm
- Length: 350mm
- Material: Aluminum
- Max Height: 255mm
- Min Height: 130mm
- Offset (mm): 0mm
- Seatpost Type: Suspension
- Travel (mm): 35mm
- Weight: 450g

$28.00
Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards.
- Constructed with AL-6061-T6 aluminum
- Shot-peened finish
- 0mm offset

$270.00
- Designed using SRAM Exogram technology
- Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately)
- Matte Black finish
- Seat Post Diameter: 31.6mm
- Seat Post Length: 400mm

$172.00
The carbon Service Course SL seatpost is specifically tuned to be more shock absorbing than the "comfort" seatposts on the market, while still passing our strict internal MTB strength test. Flex engineered into the lightweight carbon tube keeps the rider comfortable over any terrain. Better fit means better performance, and if your saddle is out of position, you'll waste energy with every pedal stroke. The secure, two-bolt clamp makes for easy micro-adjustments of saddle position, and the head has been redesigned for maximum bolt-head accessibility. The Service Course SL seatpost makes it possible for nearly any rider to achieve the perfect fit, and the clamp works with all saddle rail types.
- Distinctive Zipp cosmetics
- Unidirectional Carbon fiber tuned for ride comfort
- Lightweight clamping system
- Lifetime warranty

$199.99
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains.
- Cable activated, hydraulic action, infinitely adjustable travel
- Double key-way design prevents lateral twisting
- Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails
- Sealed cartridge internals for quick replacement
- Low profile head-seal and saddle clamp increase useable travel

$199.00
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains.
- Cable activated, hydraulic action, infinitely adjustable travel
- Double key-way design prevents lateral twisting
- Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails
- Sealed cartridge internals for quick replacement
- Low profile head-seal and saddle clamp increase useable travel

$70.00
The Whisky No.7 Seatposts are made from the highest quality materials to be durable, lightweight, and comfortable. Whether you’re remounting during the cross race, or abusing them on the trail, you can trust Whisky’s seatposts. Available in different diameters and offsets.
- Convenient finger adjustment of saddle angle
- Unidirectional carbon shaft, forged aluminum head
- No rider weight limit
- 5 year Whisky warranty
- ASTM Condition 3 - For rough off-road riding and jumps less than 24"

$105.00
Seatposts can be an overlooked part of the bike, but at Whisky Parts Co., everything gets the same attention to detail so your ride never suffers. Their seatposts are made from the highest quality carbon, ensuring they are durable, lightweight, and comfortable. Whether you’re remounting during a cross race or abusing them on the trail, you'll be glad you have the No.7.
- Carbon shaft absorbs trail chatter
- UD carbon shaft, forged aluminum head

$55.00
The Velo Orange Grand Cru seatpost is made from one piece of aluminum, internally ovalized to trim weight. The Grand Cru seatpost’s head is integral with the post – not pressed on – for great strength and weight savings.
0mm Setback: Zero-setback/offset posts are commonly used on mountain bikes and by some bikepackers. The Grand Cru zero setback post uses a one-bolt, ergonomic side-adjustment mechanism for both saddle rail clamping and fore-aft adjustment.
30.2mm Setback: For riders who prefer the comfort of leather saddles but have found proper saddle placement difficult due the short rails on leather saddles Velo Orange offers the Grand Cru Long Setback with an ample 30.2mm of setback. This model uses a two-bolt design.

$64.00
TruVativ's Stylo T30 Seatpost is constructed with a 1-piece 3D-forged 7050 aluminum tube to be light and strong. The sturdy dual-bolt head provides loads of adjustability so you can fine tune your saddle position.

$33.99
• Aluminum
• Coil spring suspension
• Adjustable pre-load design
• Collar adjustment for play removal
• 7/8-inch seat-clamp diameter

$33.00
Sunday's Pivotal Seatpost uses a traditional straight-up pivotal design. It looks good in black, keeps your seat where you want it, and takes a beating — everything you need in a seatpost.

$29.99
The Tuner pivotal post features a 220mm length with grooves evenly spaced every 15mm for cut lines or seat height indication.
- 6061 alloy forged post
- Weight: 4.6oz
- Clamp Style: Pivotal

$104.00
The Salsa Guide Carbon Seatpost is lightweight, durable, and supportive when you need it most.
- Carbon shaft
- Bonded Aluminum two-bolt head

$70.00
The Salsa Guide Deluxe Seatpost is premium aluminum: lightweight, strong, and drama-free. Count on it to be there when you need it.
- 2014 Aluminum shaft
- Two-bolt head

$80.00
- Alloy mast with micro clamp aluminum head - One bolt adjusts tilt and fore-aft saddle position (no-offset clamp)
- I-Beam single rail clamp post specific to I-Beam saddles

$249.99
- Internal Routed, Infinitely Adjustable Design
- Simplistic - Fully Sealed Alloy Cage / Stainless Tip Cartridge System
- Durable 3D Forged Head - With 7075-T6 Forged Clamp
- Featherlight Thumb Actuation - Industry Leading
- Intelligent Keyway System - Ensures Minimal Play
- Easiest Installation - Cable Head Attaches At Base
- Cold Weather Approved - Tested Down To -20C.
- 1x Lever included - With Premium Jagwire Lex Slick Housing, Stainless Cable and Hardware
- Remote Position: On handlebar
- Cable Routing: Internal
- Offset: 0mm
- Clamp Type: Standard, double bolt
- Seat Post Material: Aluminum
- Seat Post Weight: 510g

$269.99
- Longer Drop – The Tellis is now available in 200mm drop so riders can benefit from the ability to further drop their saddle. This allows for more free movement on the bike when the trails get steep, fast or technical
- The same proven & trusted design, now in a longer 200mm drop length
- Internal Routed, Infinitely Adjustable Design
- Simplistic—Fully Sealed Alloy Cage / Stainless Tip Cartridge System
- Durable 3D Forged Head—With 7075-T6 Forged Clamp
- Intelligent Keyway System—Ensures Minimal Play
- Easiest Installation—Cable Head Attaches At Base
- Cold Weather Approved—Tested Down To -20C
- Featherlight Lever Thumb Actuation—Industry Leading
- 282mm insertion length
- 1x Lever included—With Premium Jagwire Lex Slick Housing, Stainless Cable and Hardware

$429.00
The Reverb Stealth features Vent Valve Technology for super simple service if the need arises. Redesigned internals provide effortless actuation and increased reliability. With reduced overall post lengths and new travel options, riders of all shapes and sizes benefit from more travel than ever before. The new Reverb Stealth redefines what it means to simply go up and down.
- Shorter overall post length
- Stealth Internal cable routing

$68.00
The proven 2-bolt design on this classic provides a class-leading balance between strength, weight, and adjustability. The two-bolt design is easy to adjust and holds tight. Its low profile clamp reduces stress on lightweight rails and won't bottom out, and the bolts are oriented to the axis of the rails for the greatest contact area with the saddle. The Classic also features Ritchey's 'Classic' high-polish silver finish.
- Material: 2014 alloy
- Total length: 350mm (including 100mm of minimum insert)
- Saddle clamp: standard
- Saddle clamp torque: 13Nm (max)
- Seat collar torque: not specified - follow frame/seat binder specification
- Weight: 260g (27.2x350mm)
- Color: high-polish silver

$100.00
Sleek design and ultimate functionality of the WCS 1-Bolt seatpost are the hallmarks of Ritchey design. Single bolt-actuated side load clamp offers easy adjustability and simple security in a post that works as nicely as it looks.
- 3D Forged 7050 Alloy
- Available in 27.2, 30.9 and 31.6mm diameters
- Available in 350 and 400mm lengths
- 20mm Offset
- 7x7mm saddle rail clamp included
- Interchangeable clamps available for carbon rail saddles
- Saddle Clamp Torque Spec: 12Nm
- Finish: Blatte
- 195g (27.2/350)

$240.00
The smooth and sleek design of the patented SideBinder clamp makes the Ritchey WCS Carbon 1-Bolt a sophisticated choice to finish off a performance-oriented build. The beauty of this carbon masterpiece lies in the simplicity of the design of the wide clamp head. Secured with a single 5mm bolt, this post offers ease of adjustability while relieving stress on saddle rails.
- Monocoque carbon construction
- Available in 27.2 & 31.6mm diameters
- Available in 350 and 400mm lengths
- 7x7mm saddle rail clamp included
- Interchangeable clamps available for all different carbon rail sizes
- Saddle clamp torque spec: 12Nm
- Matte UD carbon finish
- 185g (27.2/350)
Page 1 of 3
Next page