Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Zipp Super-9 Disc Carbon Rear Wheel (Clincher)
$2,731.00
Equip yourself with the wheel that carried Tony Martin to a World Championship and reach the pinnacle of your own potential. Zipp’s Super-9 Carbon Clincher Disc underwent extensive fluid dynamic modeling, wind-tunnel testing, and relentless refinement so you can enjoy no-holds-barred aero domination. With a variance in width of just a single centimeter from rim to hub, the Super-9 is almost invisible to the wind. Plus the wide rim creates a virtually seamless integration with the tire, increasing aerodynamics and allowing wider tires run at a lower pressure. This diminishes rolling resistance, increases rider comfort, and reduces the chance of pinch flatting.
Whisky Parts Co. No.9 30d Front
$725.00
Whisky No.9 30d carbon road wheels deliver leading edge, tubeless performance across a broad range of drop bar disciplines. The No.9 30d road rims offer a lightweight, stable platform with a wide internal width that pairs well with 25-35c tires. These disc brake-specific wheels have clean lines and provide great versatility from tarmac to gravel, brevets to the CX course. These wheels are Whisky’s lightweight go-to choice for all-around performance. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Each wheel includes a Whisky tubeless valve and tape
Whisky Parts Co. No.9 30w Front 27.5-inch
$725.00
Whisky No.9 30w carbon tubeless wheels are the most versatile performance wheels offered by Whisky. The No.9 30w rims have a 24mm internal width that supports a variety of tires from road plus to standard mountain sizes and feature hookless walls for easy tubeless setup and impact resistance. The No.9 30w wheels are light and wide, providing great versatility no matter where your ride takes you. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight, and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Each wheel includes a Whisky tubeless valve and tape
Whisky Parts Co. No.9 30w Front 29-inch
$725.00
Whisky No.9 30w carbon tubeless wheels are the most versatile performance wheels offered by Whisky. The No.9 30w rims have a 24mm internal width that supports a variety of tires from road plus to standard mountain sizes, and feature hookless walls for easy tubeless set up and impact resistance. The No.9 30w wheels are light and wide, providing great versatility no matter where your ride takes you. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight, and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Each wheel includes a Whisky tubeless valve and tape
Whisky Parts Co. No.9 36w Front 27.5-inch
$725.00
Whisky No.9 36w carbon wheels are made for all-around trail riding and off-road touring; striking a balance between width and weight. Intended to support a wide range of modern mountain bike tires, the No.9 36w rims have a 30mm internal width, feature hookless beads for easy tubeless setup and impact resistance. The wider rim width creates a broad base for the tire casing to support side knobs better, for increased comfort and traction. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Each wheel includes a Whisky tubeless valve and tape
Whisky Parts Co. No.9 40w Front 27.5-inch
$725.00
Whisky No.9 40w Wheels are made to be wide, light, and versatile. Optimized for use with wide trail and plus-sized tires, the No.9 40w rims have a 35mm internal width, feature hookless beads for easy tubeless set up and impact resistance. The No.9 40w wheels offer stiff, lightweight performance gains across the board; these disc brake-specific wheels have a minimalist design and clean aesthetics. - Built with DT Swiss 350 hubs, 32 DT Competition Double Butted Spokes, and brass nipples to maximize performance and reliability - An ideal option for short- to mid-travel mountain bikes, plus tire set ups, or off-road touring rigs - Includes tubeless valves and pre-installed Whisky Tubeless tape with an additional roll for future use - Recommended weight limit: 240lbs - 50psi max tire pressure
Whisky Parts Co. No.9 40w Front 29-inch
$725.00
Whisky No.9 40w Wheels are made to be wide, light, and versatile. Optimized for use with wide trail and plus-sized tires, the No.9 40w rims have a 35mm internal width, feature hookless beads for easy tubeless set up and impact resistance. The No.9 40w wheels offer stiff, lightweight performance gains across the board; these disc brake-specific wheels have a minimalist design and clean aesthetics. - Built with DT Swiss 350 hubs, 32 DT Competition Double Butted Spokes, and brass nipples to maximize performance and reliability - An ideal option for short- to mid-travel mountain bikes, plus tire set ups, or off-road touring rigs - Includes tubeless valves and pre-installed Whisky Tubeless tape with an additional roll for future use - Recommended weight limit: 240lbs - 50psi max tire pressure
Whisky Parts Co. No.9 50d Front
$725.00
Whisky No.9 50d wheels deliver stable and robust performance, both on and off the road. The No.9 50d rims offer a lightweight, aero platform with a wide internal width that pairs well with 25-35c tires. These disc brake-specific wheels have clean lines and provide great versatility from tarmac to gravel, brevets to the CX course. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Each wheel includes a Whisky tubeless valve and tape
Whisky Parts Co. Whisky No.9 100w Fat Front Wheel
$725.00
Whisky No.9 100w fat bike wheels have a 94.5mm inner width to maximize the footprint of fat tires up to 5.05-inch wide. It’s double-wall construction makes it a unique, one of a kind carbon fat rim. It supports the structure of the tire’s sidewall for a stable, traction-laden ride while simultaneously improving your float on snow and sand. No.9 100w wheels are entirely hand built in Minnesota to exacting standards with proven DT Swiss 350 Big Ride hubs offering a great mix of performance and reliability. DT Swiss Competition double butted spokes and brass nipples offer serviceability, durability, and strength to produce a versatile wheel for a wide variety of conditions.
Whisky Parts Co. Whisky No.9 70w Fat Front Wheel
$725.00
Whisky No.9 70w fat bike wheels offer a refined, lightweight, tubeless set up. They are optimized for 3.8?5.05-inch tires and utilize a double-wall construction that ensures a sturdy rim profile to maximize cornering stability. The No.9 70w fat bike wheels are entirely hand built in Minnesota to exacting standards with proven DT Swiss 350 Big Ride hubs offering a great mix of performance and reliability. DT Swiss Competition double butted spokes and brass nipples offer serviceability, durability, and strength to produce a versatile wheel for a wide variety of conditions.
Whisky Parts Co. Whisky No.9 80w Fat Front Wheel
$725.00
Whisky No.9 80w fat bike wheels offer 27.5-inch fat bike riders a light weight, tubeless platform to maximize the inherent rollover and longer contact patch of 27.5-inch fat tires while combating the weight penalty a larger diameter alloy rim can exhibit. Their TBLS beads offer secure tire performance at low pressures. No.9 80w 27.5-inch wheels are entirely hand built in Minnesota to exacting standards with proven DT Swiss 350 Big Ride hubs offering a great mix of performance and reliability. DT Swiss Competition double butted spokes and brass nipples offer serviceability, durability, and strength to produce a versatile wheel for a wide variety of conditions.
Whisky Parts Co. No.9 30d Rear
$875.00
Whisky No.9 30d carbon road wheels deliver leading edge, tubeless performance across a broad range of drop bar disciplines. The No.9 30d road rims offer a lightweight, stable platform with a wide internal width that pairs well with 25-35c tires. These disc brake-specific wheels have clean lines and provide great versatility from tarmac to gravel, brevets to the CX course. These wheels are Whisky’s lightweight go-to choice for all-around performance. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Each wheel includes a Whisky tubeless valve and tape
Whisky Parts Co. No.9 30w Rear 27.5-inch
$875.00
Whisky No.9 30w carbon tubeless wheels are the most versatile performance wheels offered by Whisky. The No.9 30w rims have a 24mm internal width that supports a variety of tires from road plus to standard mountain sizes and feature hookless walls for easy tubeless setup and impact resistance. The No.9 30w wheels are light and wide, providing great versatility no matter where your ride takes you. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Includes Whisky tubeless valves and tape
Whisky Parts Co. No.9 30w Rear 29-inch
$875.00
Whisky No.9 30w carbon tubeless wheels are the most versatile performance wheels offered by Whisky. The No.9 30w rims have a 24mm internal width that supports a variety of tires from road plus to standard mountain sizes and feature hookless walls for easy tubeless setup and impact resistance. The No.9 30w wheels are light and wide, providing great versatility no matter where your ride takes you. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Includes Whisky tubeless valves and tape
Whisky Parts Co. No.9 36w Rear 27.5-inch
$875.00
Whisky No.9 36w carbon wheels are made for all-around trail riding and off-road touring; striking a balance between width and weight. Intended to support a wide range of modern mountain bike tires, the No.9 36w rims have a 30mm internal width, feature hookless beads for easy tubeless setup and impact resistance. The wider rim width creates a broad base for the tire casing to support side knobs better, for increased comfort and traction. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Each wheel includes a Whisky tubeless valve and tape
Whisky Parts Co. No.9 36w Rear 29-inch
$875.00
Whisky No.9 36w carbon wheels are made for all-around trail riding and off-road touring; striking a balance between width and weight. Intended to support a wide range of modern mountain bike tires, the No.9 36w rims have a 30mm internal width, feature hookless beads for easy tubeless set up and impact resistance. The wider rim width creates a broad base for the tire casing to support side knobs better, for increased comfort and traction. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Each wheel includes a Whisky tubeless valve and tape
Whisky Parts Co. No.9 40w Rear 27.5-inch
$875.00
Whisky No.9 40w Wheels are made to be wide, light, and versatile. Optimized for use with wide trail and plus-sized tires, the No.9 40w rims have a 35mm internal width, feature hookless beads for easy tubeless set up and impact resistance. The No.9 40w wheels offer stiff, lightweight performance gains across the board; these disc brake-specific wheels have a minimalist design and clean aesthetics. - Built with DT Swiss 350 hubs, 32 DT Competition Double Butted Spokes, and brass nipples to maximize performance and reliability - An ideal option for short- to mid-travel mountain bikes, plus tire set ups, or off-road touring rigs - Includes tubeless valves and pre-installed Whisky Tubeless tape with an additional roll for future use - Recommended weight limit: 240lbs - 50psi max tire pressure
Whisky Parts Co. No.9 40w Rear 29-inch
$875.00
Whisky No.9 40w Wheels are made to be wide, light, and versatile. Optimized for use with wide trail and plus-sized tires, the No.9 40w rims have a 35mm internal width, feature hookless beads for easy tubeless set up and impact resistance. The No.9 40w wheels offer stiff, lightweight performance gains across the board; these disc brake-specific wheels have a minimalist design and clean aesthetics. - Built with DT Swiss 350 hubs, 32 DT Competition Double Butted Spokes, and brass nipples to maximize performance and reliability - An ideal option for short- to mid-travel mountain bikes, plus tire set ups, or off-road touring rigs - Includes tubeless valves and pre-installed Whisky Tubeless tape with an additional roll for future use - Recommended weight limit: 240lbs - 50psi max tire pressure
Whisky Parts Co. No.9 50d Rear
$875.00
Whisky No.9 50d wheels deliver stable and robust performance, both on and off the road. The No.9 50d rims offer a lightweight, aero platform with a wide internal width that pairs well with 25-35c tires. These disc brake-specific wheels have clean lines and provide great versatility from tarmac to gravel, brevets to the CX course. - Centered around DT Swiss 350 hubs, well-known for their balance of performance, weight and tool-free serviceability - Laced with j-bend DT Aerolite spokes and brass nipples for durability and serviceability - Each wheel includes a Whisky tubeless valve and tape
Whisky Parts Co. No.9 70W Rear Wheel
$875.00
Whisky No.9 70w fat bike wheels offer a refined, lightweight, tubeless set-up that can support a range of tire widths from 3.8- to 5.05-inches wide. It utilizes a double-wall construction, which ensures a sturdy rim profile to maximize cornering stability. Hand-built in Minnesota to exacting standards, these wheels feature DT Swiss 350 Big Ride hubs, Competition double butted spokes, and brass nipples to maximize performance and reliability. The No.9 70w wheels provide a perfect balance of durability and strength to produce a versatile wheel for a wide variety of conditions. - Optimized width for all-around fat bike trail use - DT Swiss 350 Big Ride Hubs offer tool-free servicing and proven performance - Pre-installed Whisky Tubeless tape, with an additional roll included - Whisky Tubeless Presta Valves included - Cassette Body Type: Shimano Dynasys 11 Speed Mountain, Shimano/SRAM 8, 9, 10 Speed - Hub/Brake Compatibility: Center Lock Disc - Rim Width (Internal): 65mm - ISO Diameter: 559 / 26" mtn - Rear Axle: 197 x 12mm - Tire Type: Tubeless Ready Clincher - Wheel Size: 26" Fat - Defined Color: Carbon
Whisky Parts Co. Whisky No.9 100w Fat Rear Wheel
$875.00
Whisky No.9 100w fat bike wheels have a 94.5mm inner width to maximize the footprint of fat tires up to 5.05-inch wide. It’s double-wall construction makes it a unique, one of a kind carbon fat rim. It supports the structure of the tire’s sidewall for a stable, traction-laden ride while simultaneously improving your float on snow and sand. No.9 100w wheels are entirely hand built in Minnesota to exacting standards with proven DT Swiss 350 Big Ride hubs offering a great mix of performance and reliability. DT Swiss Competition double butted spokes and brass nipples offer serviceability, durability, and strength to produce a versatile wheel for a wide variety of conditions.
Whisky Parts Co. Whisky No.9 70w Fat Rear Wheel
$875.00
Whisky No.9 70w fat bike wheels offer a refined, lightweight, tubeless set up. They are optimized for 3.8?5.05-inch tires and utilize a double-wall construction that ensures a sturdy rim profile to maximize cornering stability. The No.9 70w fat bike wheels are entirely hand built in Minnesota to exacting standards with proven DT Swiss 350 Big Ride hubs offering a great mix of performance and reliability. DT Swiss Competition double butted spokes and brass nipples offer serviceability, durability, and strength to produce a versatile wheel for a wide variety of conditions.
WeThePeople Supreme 22-inch Front
$199.99
WeThePeople took their bombproof Supreme front hub, added nylon hub guards, and then laced it up to their wide and rugged Logic rim to make one tough-as-nails wheel, ready to go, straight out of the box. - 14mm hollow/hardened heat treated Chromoly axle - 10mm female bolts - Includes nylon rim tape - Includes a second set of cones for use without hub guards
WeThePeople Supreme 22-inch Rear
$289.99
WeThePeople took their bombproof Supreme rear hub, added nylon hub guards, and then laced it up to their wide and rugged Logic rim to make one tough-as-nails wheel, ready to go, straight out of the box. - 14mm hollow/hardened heat treated Chromoly axle - 10mm female bolts - Includes nylon rim tape - Includes a second set of cones for use without hub guards - 9T driver, RHD
Vittoria Alusion Wheelset
$499.99
Vittoria's Alusion wheelset features a wide-section rim profile to make full use of the grip and handling characteristics of today's road tires. It delivers the durability you need in a training wheelset that keeps weight down, so you can practice like you play. Straight-pull spokes drop weight and increase the Alusion's reliability, while the asymmetrical rear wheel design balances spoke tension for a stronger build. All this adds up to a versatile, long-lasting wheelset you can rely on daily.
Surly Marge Lite Rear Wheel
$285.00
Surly's Marge Lite Rear Wheel is the skinniest of Surly's fat bike bunch, yet still sports all the cushion, suspension, and traction that you need to float over rocks, sand, and snow. The 65mm-wide Marge Lite rim is a single-wall aluminum hoop that shines when paired with a 4- to 5-inch wide tire. Tying it all together are DT Swiss spokes laced to your choice of Surly's singlespeed rear disc hub, or a Shimano XT disc rear hub. They roll smooth and are ready and willing for all your off-road adventures.
Strider Ultralight Replacement Wheel
$16.99
• Strong Custom Strider Rim • Durable No-Flat Tire • Tread pattern and bearings matches the ST-4, and will fit on any ST-Model
Strider Aluminum Wheelset w/Tires & Tubes
$59.99
Kids wearing out their Strider? That's a good thing! Upgrade their out-of-doors adventures with these aluminum wheels. These lightweight 12-inch wheels are a great upgrade for trail riding and come with tires and tubes.
Stan's NoTubes Arch S1
$201.00 - $278.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Arch S1 Wheelset - Use: Trail and Enduro - Internal Rim Width: 26mm - Optimal Tire Size: 2.25 to 2.5-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (1,882g) and 29-inch (1,974g)
Stan's NoTubes Baron S1
$201.00 - $278.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Baron S1 Wheelset - Use: Plus Tire Performance, Adventure, and Trail - Internal Rim Width: 35mm - Optimal Tire Size: 2.8 to 3.2-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,998g), 27.5-inch (2,060g), and 29-inch (2,162g)