Cables

- Flexible linear pull brake guide - Guides cable to brake arm - Bag of 10

- Steel cable noodle with alloy end caps - Includes plastic liner

Jagwire anti-kink end caps are made with a flexible tip to eliminate kinks or cracks in the housing where there are tight bends or repeated motion. These are perfect for use with folding bikes, suspension lockouts, dropper seatposts and handcycles. Use anti-kink end caps on any area of the bike where shift or brake housing has extreme or tight bends. - Eliminates kinks and loose connections at tight bends - Perfect for folding bikes and height-adjust seatposts

Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise. - 10mm outside diameter - Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose

Frame mounted barrel adjusters allow cable tension to be easily fine tuned. - Adjuster threading is M5 standard: 5mm OD, 0.8mm thread pitch - Bag of 10

- Alloy cable ends - For 1.2mm to 1.6mm cables - Silver

Rejuvenate the performance of your brakes with this convenient and valuable kit that includes all parts needed for installation. Kit includes lubed housing, pre-stretched stainless steel cables, ferrules, cable frame protectors, and cable end caps for front and rear brakes. - This convenient and valuable kit is the key to restoring your brake's performance - Compatible with nearly all braking systems - Stainless steel cables are 2750mm and 1700mm long, for front and rear brakes - Compressionless housing comes pre-lubed is 3000mm long - Kit includes Comp brake ferrules, cable frame protectors, and cable end caps - Included stainless steel cables are rust-proof and come pre-stretched

Rejuvenate the performance of your drivetrain with this convenient and valuable kit that includes all parts needed for installation. - This convenient and valuable kit is the key to restoring your shifting performance - Compatible with Shimano and SRAM drivetrains - Stainless steel cables are each 2300mm long, for front and rear shifting - Compressionless housing comes pre-lubed is 3200mm long - Kit includes Comp shift ferrules, cable frame protectors, and cable end caps - Included stainless steel cables are rust-proof and come pre-stretched - Diameter: 4mm

Upgrade the performance of your brakes with this convenient kit that includes all parts needed for smooth and reliable performance. - This smooth and reliable kit is a great performance upgrade for your bike - Compatible with nearly all braking systems - Low-friction cables are 2300mm and 1700mm long, for front and rear brakes - Black compressionless housing comes pre-lubed is 3000mm long - Kit includes Elite brake ferrules, frame protectors, and cable end caps - Included stainless steel cables are rust-proof and come pre-stretched - Housing diameter: 5mm

Elegant style meets incredible weight savings with the XXX Cable and Housing set. It's time to take your road machine to the next level. Linked alloy housing is up to 40% lighter than traditional alternatives, while also being more flexible and incredibly smooth for class-leading performance. Product details - This lightweight, flexible, and elegant kit is perfect for the demanding rider - Compatible with Shimano and SRAM drivetrains - Ultra-low-friction cables are both 2300mm long, for front and rear shifting - Diameter: 4mm - XXX housing features Pro lube and is lighter, more flexible, and stiffer than standard - Kit includes XXX shift ferrules, Pro Inline Cable Tension Adjuster, frame protectors, and cable end caps - For installation instructions, visit: trekbikes.com/manuals - Included stainless steel cables are rust-proof and come pre-stretched

Precision-machined 4mm ID brass cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables. - Inside diameter: 4mm - Outside diameter: 5. 75mm - Overall length: 12. 7mm - Material: brass - Bottle of 50pcs

Precision-machined 5mm ID brass cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables. - Inside diameter: 5mm - Outside diameter: 5.75mm - Overall length: 12.7mm - Material: brass - Bottle of 50pcs

- Precision-machined cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 4mm ID for use with most shifting cables - 5mm ID for use with most braking cables - 100-count bottle

Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.

Precision-machined 4mm ID silver aluminum cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables. - Inside diameter: 4mm - Outside diameter: 5.75mm - Overall length: 12.7mm - Material: aluminum - Bottle of 50pcs

Precision-machined 5mm ID silver aluminum cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables. - Inside diameter: 5mm - Outside diameter: 5.75mm - Overall length: 12.7mm - Material: aluminum - Bottle of 50pcs

Hydraulic hose with banjo fitting for TRP brakes.

Hydraulic hose with banjo fitting for TRP brakes.

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

- MTB or Road - Stainless steel - 1.5mm diameter - 2000mm length

- Galvanized steel inner wire - Standard 5mm brake housing - Front or Rear

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

- Replacement link wire for cantilever brakes

- 50 feet (15.2 meters) length - 5mm diameter cable housing - For brake cables

- MTB or Road - 1.5 x 1855mm - Galvanized

- MTB or Road - 1.5 x 2667mm - Galvanized

- Galvanized steel inner wire - Standard 5mm S.I.S. housing - Front or Rear - Mountain or road

- 50 feet (15.2 meters) length - 5mm diameter brake cable housing

- Routes cables underneath the bottom bracket - Will not rust or corrode

- Use: Brake - Length: 30mm - Diameter: 5mm

Shifting cables for Road/Mountain bikes.

- Multi-strand construction - Length: 25 feet - Size: 4mm

- Multi-strand construction - Length: 25 feet - Size: 5mm

- Use: S.I.S. - Length: 30mm

- Galvanized steel inner wire - PTFE lined brake housing - Front or Rear - Mountain or road

- Stainless steel shifter cable - PTFE-coated for reduced friction - Length: 2000mm - 1.1mm compatible with Shimano, SRAM, and Campagnolo shifters - 1.2mm compatible with Shimano and SRAM shifters

- For mountain bike cable-actuated brakes - 1.5mm x 3000mm - Stainless steel

- Fits cantilever brakes - Sold individually

- Complete cable kits for internal three-speed hubs

- Rubber - Color: Black

Shimano, SP41, 4mm Shifter housing, 50m

- Brake housing for polymer coated brake cables - Refer to Documents and links to find the right product

- Shimano, Y8JA98020, SM-BH90, Olive and connecting insert

- Disc brake hose for all hydraulic Shimano disc brakes with straight connection type. Length 2000mm, outer diameter approx. 5mm. - Compatible brake levers: BL-T615, ST-M4050, BL-M506, BL-M505, BL-M445, BL-M396, BL-M395, BL-M355 - Compatible brake caliper: BR-T615, BR-M4050, BR-M447, BR-M446, BR-M395, BR-M355 - Also compatible ST-RS785 and ST-RS685 road hydraulic levers with BR-RS785 or BR-RS805 calipers - Straight connection at lever and caliper

Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation. - Dura-Ace grade SLR-EV Road brake cable set - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance - Pre-lubed with special polymer compatible grease

Shimano Stainless Derailleur Cables Cable Head: Shimano/SRAM Cable Type: Stainless Defined Color: Gray Diameter: 1.2mm Double Ended: No Length: 3000 mm Quantity Included: 1

Shimano Stainless Road/MTB Brake Cable & Housing Sets - 1 x 2000mm black 5mm housing - 1 x 1000mm and 1 x 2050mm 1.6mm stainless cables - 2 end caps and 2 cable crimps

- 1.2 mm x 2100 mm (1 pc.) - 1.2 mm x 1800 mm (1 pc.) - OPTISLICK - Stainless steel - Outer cap with short tongue for ST (2 pcs.) - SIS-SP40 outer caps (3 pcs.) - SIS-SP40 sealed outer caps (1 pc.) - Inner end caps (2 pcs.) - OT-SP41 1700 mm - OT-RS900 (1 pc.)

These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation. Includes: - 1400mm x 5mm housing x 1 - 800mm x 5mm housing x 1 - 2050mm x 1.6mm cable x 1 - 1000mm x 1.6mm cable x 1

Shimano, SLR brake housing, 40m, Black

- Wet or muddy condition cable sealing solution - 4/6mm

- Brake casing has internal lining and external plastic coating - Derailleur casing is compressionless with internal lining and external plastic coating

- Brake casing has internal lining and external plastic coating - Length: 30m

- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut

SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other, and making rattling noises, and they provide a tidy custom look, too.

- Complete ferrule and cable end kit - Includes: Shift 4.0mm (Qty10), Brake 5.0mm (Qty 6), Cable Tip (Qty 4) - Material: Aluminum

SRAM's Ferrule Kit is just the thing to keep on hand for your brake- and shift-cable replacement and repairs. You get 10 4mm-diameter aluminum shift ferrules, 6 5mm-diameter aluminum brake ferrules, plus 3 aluminum cable crimps to prevent frayed cables.

SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes. - Compatible with SRAM Guide R, RS, RSC, and DB5 brakes - Length: 2000mm

SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.

Replacement line kit for SRAM and Avid hydraulic disc brakes. - For Level Ultimate/Level TLM (A1), 2018+ CODE R/RSC (B1) - 2000mm, black